Table of Contents

• Quagga
• 1 Overview
  • 1.1 About Quagga
  • 1.2 System Architecture
  • 1.3 Supported Platforms
  • 1.4 Supported RFC
  • 1.5 How to get Quagga
  • 1.6 Mailing List
  • 1.7 Bug Reports
• 2 Installation
  • 2.1 Configure the Software
    • 2.1.1 The Configure script and its options
    • 2.1.2 Least-Privilege support
    • 2.1.3 Linux Notes
  • 2.2 Build the Software
  • 2.3 Install the Software
• 3 Basic commands
  • 3.1 Config Commands
    • 3.1.1 Basic Config Commands
    • 3.1.2 Sample Config File
  • 3.2 Terminal Mode Commands
  • 3.3 Common Invocation Options
  • 3.4 Virtual Terminal Interfaces
    • 3.4.1 VTY Overview
    • 3.4.2 VTY Modes
      • 3.4.2.1 VTY View Mode
      • 3.4.2.2 VTY Enable Mode
      • 3.4.2.3 VTY Other Modes
    • 3.4.3 VTY CLI Commands
      • 3.4.3.1 CLI Movement Commands
      • 3.4.3.2 CLI Editing Commands
      • 3.4.3.3 CLI Advanced Commands
• 4 Zebra
  • 4.1 Invoking zebra
  • 4.2 Interface Commands
  • 4.3 Static Route Commands
  • 4.4 zebra Terminal Mode Commands
• 5 RIP
  • 5.1 Starting and Stopping ripd
    • 5.1.1 RIP netmask
  • 5.2 RIP Configuration
  • 5.3 How to Announce RIP route
  • 5.4 Filtering RIP Routes
  • 5.5 RIP Metric Manipulation
  • 5.6 RIP distance
  • 5.7 RIP route-map
  • 5.8 RIP Authentication
  • 5.9 RIP Timers
  • 5.10 Show RIP Information
  • 5.11 RIP Debug Commands
• 6 RIPng
  • 6.1 Invoking ripngd
  • 6.2 ripngd Configuration
  • 6.3 ripngd Terminal Mode Commands
  • 6.4 ripngd Filtering Commands
• 7 OSPFv2
  • 7.1 Configuring ospfd
  • 7.2 OSPF router
  • 7.3 OSPF area
  • 7.4 OSPF interface
  • 7.5 Redistribute routes to OSPF
  • 7.6 Showing OSPF information
  • 7.7 Debugging OSPF
• 8 OSPFv3
  • 8.1 OSPF6 router
  • 8.2 OSPF6 area
  • 8.3 OSPF6 interface
  • 8.4 Redistribute routes to OSPF6
  • 8.5 Showing OSPF6 information
• 9 BGP
  • 9.1 Starting BGP
  • 9.2 BGP router
    • 9.2.1 BGP distance
    • 9.2.2 BGP decision process
  • 9.3 BGP network
    • 9.3.1 BGP route
    • 9.3.2 Route Aggregation
    • 9.3.3 Redistribute to BGP
  • 9.4 BGP Peer
    • 9.4.1 Defining Peer
    • 9.4.2 BGP Peer commands
    • 9.4.3 Peer filtering
  • 9.5 BGP Peer Group
  • 9.6 BGP Address Family
  • 9.7 Autonomous System
    • 9.7.1 AS Path Regular Expression
    • 9.7.2 Display BGP Routes by AS Path
    • 9.7.3 AS Path Access List
    • 9.7.4 Using AS Path in Route Map
    • 9.7.5 Private AS Numbers
  • 9.8 BGP Communities Attribute
    • 9.8.1 BGP Community Lists
    • 9.8.2 Numbered BGP Community Lists
    • 9.8.3 BGP Community in Route Map
    • 9.8.4 Display BGP Routes by Community
    • 9.8.5 Using BGP Communities Attribute
  • 9.9 BGP Extended Communities Attribute
    • 9.9.1 BGP Extended Community Lists
    • 9.9.2 BGP Extended Communities in Route Map
  • 9.10 Displaying BGP Routes
    • 9.10.1 Show IP BGP
    • 9.10.2 More Show IP BGP
  • 9.11 Capability Negotiation
  • 9.12 Route Reflector
  • 9.13 Route Server
    • 9.13.1 Multiple instance
    • 9.13.2 BGP instance and view
    • 9.13.3 Routing policy
    • 9.13.4 Viewing the view
  • 9.14 How to set up a 6-Bone connection
  • 9.15 Dump BGP packets and table
• 10 Configuring Quagga as a Route Server
  • 10.1 Description of the Route Server model
  • 10.2 Commands for configuring a Route Server
  • 10.3 Example of Route Server Configuration
    • 10.3.1 Configuration of the BGP routers without Route Server
    • 10.3.2 Configuration of the BGP routers with Route Server
    • 10.3.3 Configuration of the Route Server itself
    • 10.3.4 Further considerations about Import and Export route-maps
• 11 VTY shell
  • 11.1 VTY shell username
  • 11.2
• 12 Filtering
  • 12.1 IP Access List
  • 12.2 IP Prefix List
    • 12.2.1 ip prefix-list description
    • 12.2.2 ip prefix-list sequential number control
    • 12.2.3 Showing ip prefix-list
    • 12.2.4 Clear counter of ip prefix-list
• 13 Route Map
  • 13.1 Route Map Command
  • 13.2 Route Map Match Command
  • 13.3 Route Map Set Command
• 14 IPv6 Support
  • 14.1 Router Advertisement
• 15 Kernel Interface
• 16 SNMP Support
  • 16.1 Getting and installing an SNMP agent
  • 16.2 SMUX configuration
  • 16.3 MIB and command reference
• Appendix A Zebra Protocol
• Appendix B Packet Binary Dump Format
• Command Index
• VTY Key Index